Accessories:-

We are one of the leading manufacturers trader and suppliers of wide range of Precision Pump Accessories. The products offered by us are fabricated using high-grade iron and other metals alloys.

UP Pump & Systems has hundreds of accessories designed to put the power of high-pressure water to work for you. Each is the result of decades of water jetting experience, and all meet the highest quality and safety standards. Complete line of system accessories to match the performance and liquid construction of each pump. These accessories assure safety and optimum system performance. Trigger guns, pressure regulators, unloaders, safety relief valves, pressure gauges, inlet pressure regulators and filters are just a few of the wide variety of accessories available for your high pressure system. System accessories provide pump and system protection, regulate pump performance, system flexibility and extend the systems longevity. No one offers more manual, automated and semi-automated accessories, and they’re all here, in our on-line catalog. Click on any Accessory to see a photo, features and key specs with price.

Standard Accessories:-Pressure Regulating valve cum Unloader Valve, High Pressure Gun, Lance, Straight Jet Nozzle, Flat Jet Nozzle, 10 meters High Pressure Hose, 10 meters Suction Hose, Bye- Pass Hose, Pressure Gauge, 10 meters Electric Cable, DOL Starter, Water Filter, Trolley.

Unloader Valve:-

Up Pump & Systems unloader valve functions as a safety device. Unloader valves control the direction of the flow of water exiting the pump. A positive displacement pump always delivers water, regardless of whether the spray gun is open or closed. When the spray gun is closed, the unloader valve redirects the flow of water back to the inlet side of the pump. This prevents the build up of dangerously high pressure and guards against the failure of component parts. Pressure cleaners are installed with either a Trapped Pressure Unloader or a Flow Actuated Unloader.

Spray guns start, stop, and direct the flow of water from the high pressure pump’s nozzle. Squeezing the trigger releases pressure. Releasing the trigger interrupts the flow of water to the nozzle, although the pump continues to run. Without an outlet for releasing this water, pressure would continue to build. A very dangerous situation would result.

The pressure sensitive pressure regulator holds established system pressure in the discharge line and at the pump head when the trigger gun is closed or solenoid valve is closed or the nozzle is clogged, thus by-passing all un required flow. Squeezing the trigger gun or opening the solenoid valve allows for a quick return to established system pressure without delay. This is a pressure sensitive pressure regulator designed for systems with single or multiple pumps, solenoid valves, nozzles, standard guns

UP Pump & Systems offers a variety of high pressure spray guns for both, industrial and residential users. All high pressure spray guns are equipped with the 1/4" FNPT so that the lance pipe can be easily threaded into the gun. The inlet side of the gun will accept any 3/8" MNPT fitting so that the high pressure hose can be attached. Each gun is tested at the factory to ensure the quality you have come to expect from us.

UP Pump & Systems high pressure guns are lighter in weight and they are very easy to handle. The high pressure guns are designed for heavy duty application which can handle temperature of up to 300 degrees. The entire high pressure gun comes with safety lock.

The importance of pressure gauges is often overlooked. A well designed and properly sized pressure gauge should provide accurate service for years. The performance of spray nozzles, pumps and other fluid components are often judged in part by pressure gauges in the fluid system. A quality pressure gauge will pay for itself within a short period of time by increasing the accuracy and control of your process.

Most of our gauges are constructed with bourdon tubes to measure pressure and vacuum. The bourdon tube, which is a hollow metallic tube sealed at one end, flexes when pressure is applied. It flexes because it naturally wants to straighten out, but cannot because it is linked to a geared movement. As it tries to flex, this linear movement is changed to a rotational one by means of small gears. They in-turn cause the pointer to indicate the measured pressure. Gauges like this are designed for clean, non-clogging liquids and gases.

Our 1/4" threaded nozzles attach to the end of the lance by tightening in a normal clockwise motion. Nozzles feature especially hardened stainless steel construction for flow control accuracy as well as a longer life-span. Design provides optimized fluid dynamics to minimize turbulence and maximize spray performance. These nozzles are suitable for use with a wide range of flow rates and operating conditions and are available with a choice of spray patterns, spray angles and connections.

15 DEGREE- Flat Jet Nozzle Removing paint from wood, masonry or metal. Removing grease or dirt from equipment. Removing heavy mildew stains. Removing marine growth from marine equipment.

Straight jet nozzle can be identified by the nozzle "number", a four or five digit number that is stamped on the nozzle, which indicates the spray angle and orifice size. In all cases the first two digits of the nozzle number indicate the spray angle (disperse) in degrees.
EXAMPLE: 00 is 0 degree, 15 is 15 degree, 25 is 25 degree and 40 is 40 degree. The last two digits of the nozzle number indicate the orifice size. 0 DEGREE- Straight Jet Nozzle Removing hard deposits from process equipments and machinery. Cleaning tar, glue or stubborn stains from concrete. Cleaning overhead areas. Removing rust from steel and oxidation from aluminum.

Caution : The spray force from these nozzles can cause injuries if pointed directly at yourself or others.

Rotating nozzles use centrifugal force to produce a strong impact and a spray pattern. Due to the reliability and effectiveness rotary nozzles have been widely accepted. The nozzle rotates a powerful, zero degree spray pattern in a circular motion to break down tough dirt and grime. By spinning the discharge water, the spray adds additional scrubbing ability to the cleaning process. With a rotating nozzle, you can clean the following types of applications; rust removal, metal or plastic tank cleaning, paint removal and graffiti removal, wall paint stripping, washing concrete, eliminating gum from sidewalks, boat cleaning and barnacle removal, asbestos abatement, cleaning crab and lobster pots, fish nets, cleaning dirty garage floors, stripping paint from wood exterior, and removing mud and clay from highway and construction equipment. The spray pattern will cover area of 4 to 8 inches wide, depending on a distance between the lance and the surface being cleaned.

UP Pump & Systems has hundreds of accessories designed to put the power of high-pressure water to work for you. Each is the result of decades of water jetting experience, and all meet the highest quality and safety standards.

Complete line of system accessories to match the performance and liquid construction of each pump. These accessories assure safety and optimum system performance. Trigger guns, pressure regulators, unloaders, safety relief valves, pressure gauges, inlet pressure regulators and filters are just a few of the wide variety of accessories available for your high pressure system. System accessories provide pump and system protection, regulate pump performance, system flexibility and extend the systems longevity.

No one offers more manual, automated and semi-automated accessories, and they’re all here, in our on-line catalog. Click on any Accessory to see a photo, features and key specs with price.